Equipment Needed:

• KP device
  
• Router (provided by POSBASIL)
  
• Ethernet cable
  

Step 1 – Connect the Router

1. Use the provided Ethernet cable to connect the POSBASIL router to the merchant’s ISP router.
   
2. Power on the KP device.
   

Step 2 – Connect POS to the Correct Wi-Fi

1. On the POS, connect to the Wi-Fi network POSBASL (this is the router we provided, not the merchant’s own router).
   
2. The Wi-Fi password should be provided to the merchant.
   
   • If the password is unknown, follow the steps below to locate it.
     

Find the Wi-Fi Password

1. On Mission control , select the Pen icon to edit/view merchant settings.

2. Scroll down to the Equipment section.

3. The password should be listed in the Equipment box.
   

Step 3 – Configure the Printer

1. Go to POS Settings.
   
2. Select Printer.
   
3. The printer’s IP address should appear and be connected automatically.
   
4. If it is not connected, manually select the IP address to connect the printer. 

See instructions below to find the correct  IP.

Finding the Correct IP Address

1. Power off the printer.
   
2. Press and hold the Feed button (triangular button).
   
3. While holding the button, power the printer back on.
   
4. Release the button when it starts printing.
   
5. The printer will print a configuration receipt — the IP address will be listed there.